RTEC400 epoxy resin

Two-component epoxy resin

Supplied in 400 ml "Shuttle" cartridges.

RTEC400 resin is a two-component epoxy formula adhesive used for heavy-duty fixing on concrete, masonry and wood. It is supplied in 400 ml cartridges and is the ideal product for structural reinforcement with post-installed reinforcement bars.

FEATURES
  • It has a high adhesion value and a low shrinkage coefficient. This allows fixing on completely smooth surfaces (bored holes) and on various materials such as wood, brick and concrete.
  • Its mechanical characteristics remain unchanged over time.
  • It can be used for fixing on wet supports.
  • It is quick and easy to apply thanks to the mixer which causes the two components to react during injection.
  • It has a thick consistency (thixotropic), this prevents dripping and excessive loss of material in the voids that may be present in the masonry.
  • It bears the CE mark having obtained two ETA approvals (European Technical Approval) making it an approved material for use with threaded rods and reinforcement bars inserted in concrete.
These properties make this resin the ideal product to be used in the application of masonry-floor connection bars.

SPECIFICATIONS
Supply and installation of Tecnaria RTEC400 two-component thixotropic epoxy resin for joining the concrete slab of the composite floor (wood, concrete, steel - concrete-reinforced concrete) to the perimeter walls using improved adhesion reinforcement bars. The product must be applied after drilling and cleaning the hole.

Code RTEC400

Category:

Below are the estimated consumptions levels of epoxy resin depending on the diameter of the hole, the inserted bar diameter, and the depth of the hole.

RTEC 400 resin is only available as 400 ml two-component resin cartridge.

BAR DIAMETER HOLE DIAMETER AND DEPTH No. OF BARS INSTALLED PER CARTRIDGE
12 14×200 mm 19,5
12 14×300 mm 13,0
12 14×400 mm 9,5
16 18×200 mm 18,1
16 18×300 mm 7,9
16 18×400 mm 5,9

It bears the CE mark having obtained two ETA approvals (European Technical Approval) making it an approved material for use with threaded rods and reinforcement bars inserted in concrete.
These properties make this resin the ideal product to be used in the application of masonry-floor connection bars.

Download the DOP for improved rebars here

Download the DOP for threaded bars here

VIDEO



DOCUMENTS


ACT RESINA POSA EN

ACT RESINA RTEC400 LISTINO EN

ACT RESINA RTEC400 SCHEDA EN

ACT RESINA ETA140091 RTEC400 Rebar EN

ACT RESINA ETA140090 RTEC400 Rod EN

ACT RESINA RTEC400 DOP ADERENZA EN

ACT RESINA RTEC400 DOP FILETTATE EN
Setting
Name Enabled
Cookies
We use Cookies to give you a better website experience.
Cloudflare
For perfomance reasons we use Cloudflare as a CDN network. This saves a cookie "__cfduid" to apply security settings on a per-client basis. This cookie is strictly necessary for Cloudflare's security features and cannot be turned off.
Google Analytics
We track anonymized user information to improve our website.

Questo sito web utilizza i cookie
Utilizziamo i cookie per personalizzare contenuti ed annunci, per fornire funzionalità dei social media e per analizzare il nostro traffico. Acconsenta ai nostri cookie se continua ad utilizzare il nostro sito web.